Rebates

Home Renovation Savings, explained

Who qualifies, how much you can get, the exact order of steps — and how we help with the application.

⏱ 7 min read📂 Costs & rebates📍 Written for Toronto & the GTA

Key takeaways

  • Non-gas homes (electric, oil, propane, wood): $1,250 per ton, up to $7,500.
  • Enbridge gas-heated homes: $500 per ton, up to $2,000 — typically as a hybrid.
  • Pre-approval must come before installation, and the model must be on NRCan’s qualified products list.
  • Heat Pump Toronto files the application for you. You pay the installer in full; the program decides eligibility and mails you the rebate as a cheque.

How much you can get

Your current heatingRateMaximum
Electric, oil, propane or wood$1,250 per ton of heating capacity$7,500
Enbridge natural gas$500 per ton of heating capacity$2,000

The amount is based on the installed unit’s rated heating capacity, in tons (1 ton = 12,000 BTU/h). A 3-ton heat pump in an electrically heated home works out to 3 × $1,250 = $3,750.

Program rules can change

Rates and requirements are set by the program and can change. Your installer confirms current rules at pre-approval — before you sign.

Who qualifies

  • You own the home and it’s your residence in Ontario
  • You’re installing a cold-climate air-source heat pump on the NRCan qualified products list
  • You get pre-approval before the work starts
  • You submit the required documents within the program’s deadlines

The steps, in order

  1. 1
    Check your estimateAnswer a few questions and see your estimated rebate in about two minutes.
  2. 2
    Get quotesMatched installers visit, size the system and quote a qualifying model.
  3. 3
    Pre-approvalYour installer confirms eligibility and applies for pre-approval. Don’t start work before this.
  4. 4
    Install and payThe system is installed and commissioned. You pay the installer the full price.
  5. 5
    Submit documentsInvoice, model and serial numbers and any photos or forms the program asks for — your installer helps.
  6. 6
    Get your chequeThe program mails you a rebate cheque. Processing time varies.

Documents to keep

  • Signed quote and final invoice showing the model numbers
  • Pre-approval confirmation
  • Outdoor and indoor model and serial numbers (photos help)
  • Proof of your current heating type if asked (e.g., a utility bill)
  • Any program forms you signed

We file the application for you

Heat Pump Toronto submits your Home Renovation Savings application for you, starting with pre-approval before installation, so the steps happen in the right order. The program decides eligibility and pays the rebate.

Common questions

Does a new furnace or AC qualify?

No. Home Renovation Savings heat pump rebates apply to qualifying heat pumps, not furnaces or air conditioners.

I already installed my heat pump. Can I still apply?

Usually not — pre-approval before installation is required. Check with the program directly.

Do ductless systems qualify?

Yes, qualifying ductless heat pumps use the same per-ton rates.

See your estimated rebate.

Free, no obligation. Takes about two minutes.

All guides