Electrical and duct work with a heat pump: what the rebate rules say about the extra costs
Many heat pump jobs need electrical or duct work too. Ontario's rebate is set per ton, not by your bill, while the federal receipt counts this work in the total cost. Here is what the official pages say.
A heat pump job often includes more than the heat pump. Some homes need electrical work. Some need changes to the ducts. Here is what the official rebate pages say about those extra costs.
Ontario: Home Renovation Savings
Home Renovation Savings is the program open now. It is brought to you by Enbridge Gas and Save on Energy.
The rebate is not a share of your bill. It is set per ton, based on the heat pump's total rated heating capacity at 8.3°C (47°F). For a cold climate air source heat pump:
- $500 per ton, up to $2,000 if you heat with Enbridge natural gas.
- $1,250 per ton, up to $7,500 if you heat with electricity, oil, propane or wood.
So a bigger electrical or duct job does not change the rebate amount. We did not find a separate rebate for electrical or duct work on the official heat pump pages.
The rules still care about that work. The heat pump and any connected ductwork must be properly sized. They must also comply with all applicable laws, building codes and permitting requirements. The system must be able to heat the entire conditioned space, including the basement if there is one. Your contractor is responsible for the load calculations and sizing.
What the invoice has to show
Your participating contractor sends an itemized work order before the install, and a final itemized invoice afterward. The program's sample invoice asks for:
- A material cost section that breaks out the heat pump, thermostat and other equipment.
- A labour cost section.
- The total cost, including both material and labour.
You must be the person responsible for paying for the purchase and installation. You cannot stack this rebate with other Enbridge Gas, Save on Energy or Government of Ontario incentives. Funding from other sources, combined, cannot exceed 100% of the cost to supply and install the heat pump.
Federal: National Heat Pump Rebate
The federal rebate is a separate program, and it is not open yet. Canada.ca says households above the median income may be eligible for $2,000, and households at or below it may be eligible for up to $10,000. Installs from November 1, 2026 may qualify for a retroactive rebate. Applications open online in early 2027.
Here, the extra work does show up. Your receipt must show the total cost of the installation project, "including necessary directly related activities, such as ductwork and electrical upgrades." Canada.ca says actual amounts depend on household income and the cost of the equipment installed. It does not say exactly how cost changes the amount.
Funding is not guaranteed until an application is approved, and the details may still change. Canada.ca also encourages you to confirm with your contractor that the system is sized to heat your whole home.
In Toronto: a loan option
The City of Toronto's Home Energy Loan Program lists eligible heat pump costs as heat pumps and installation, electrical upgrades if required, and building permits. The rates and terms it lists are valid until December 31, 2026.
Before you sign
You can ask for a quote that lists the equipment, labour, and any electrical or duct work on separate lines. Our electrical requirements guide explains panel capacity, breakers and permits.
When you are ready, you can check your rebate for free on our home page and ask for a free quote, with no obligation.
This post is based on this article.