Keeping your furnace with a new heat pump: what Ontario's rebate rules say, including "Coils Only" systems
Ontario's Home Renovation Savings rebate lets you pair a heat pump with a new or existing furnace. Here is what the official rules say about matching the parts, and about "Coils Only" systems.
Many homes add a heat pump and keep the furnace as backup. Here is what the official rebate rules say about that setup.
This post is about Home Renovation Savings, the Ontario program from Enbridge Gas and Save on Energy. It is open now. The federal rebate is separate and comes at the end.
You can keep a furnace as backup
The program says the heat pump can work as a standalone system or with a backup heating system, such as a natural gas furnace. Where the heat pump is paired with a natural gas or propane furnace, either a new or existing furnace can be used.
The backup heating system is not eligible for the rebate. Only the heat pump system qualifies.
Oil is different. Oil-heated homes must transition their heating system to an electric heat pump. They may install electric resistance heating where backup heat is necessary.
The parts must be listed together
The installation must include all components of the heat pump system. For a central system, that means the outdoor and indoor units, as well as the furnace or air handler as applicable.
All components must be compatible and listed together under the same AHRI number. There is one exception: "Coils Only" systems.
What "Coils Only" means
For a limited number of centrally ducted heat pumps, the inside and outside units can be paired with a furnace that is already installed in the home. These units are listed with their own AHRI number, under the AHRI classification HRCU-A-C.
On the eligible product list, the search result shows model numbers for the inside and outside units. The furnace field says "Coils Only".
What the program says to check
The program says custom combinations, without appropriate furnaces and controls, can limit the benefits of the heat pump system. That can potentially reduce energy efficiency and home comfort.
It says homeowners must work with their contractor to understand the implications of operating the system with their existing furnace and thermostat.
For "Coils Only" products, the program strongly recommends that:
- the furnace has a blower with an Electronically Commutated Motor (ECM) or variable speed
- the furnace controls allow the thermostat to work properly with the heat pump system
- the thermostat is compatible with both the heat pump and the furnace
- the rated airflow of the furnace and the heat pump are similar
What stays the same
The heat pump must be an active model on Natural Resources Canada's qualified products list. Pre-approval is mandatory. Installations done before approval are not eligible.
For Enbridge Gas customers who heat with natural gas, the rebate for a cold climate air source heat pump is $500 per ton, up to $2,000.
Our guide Heat pump vs. furnace explains how a hybrid setup works in general.
The federal rebate
The National Heat Pump Rebate is a separate federal program. Canada.ca says you do not need to remove your existing system. It says the heat pump must be on the eligible product list.
Households above the median income may be eligible for $2,000. Households below the median income may be eligible for up to $10,000. Installs from November 1, 2026 may qualify, and the rebate will be available through an online portal in early 2027. Funding is not guaranteed until an application is approved, and the details may still change.
Our free rebate check on the home page uses the Ontario program's amounts, and you can ask for a free quote there.
This post is based on this article.